Panasonic DMC-FX01 - Manual (Page 55)

Advanced
55
VQT0V86
6 Press [MENU/SET] twice to close
the menu.
7 Take a picture.
A: The number of days that have passed
since the departure date
• The current date and time and which
day of the vacation it is are displayed for
about 5 seconds at the bottom of the
screen if the camera is turned on when
the travel date is set, after setting the
clock, travel date and after switching
from playback mode to another mode.
• When [TRAVEL DATE] is set, [ ]
appears on the lower right of the screen.
∫ Canceling the travel date
If you leave [TRAVEL DATE] set to [SET], the
number of days that have passed since the
departure date will continue to be recorded.
When the vacation is finished, set [TRAVEL
DATE] to [OFF] on the screen shown in
step 4 and then press [MENU/SET] twice.
• The travel date is calculated using the
date in the clock setting (P16) and the
departure date you set.
• The travel date setting is memorized even
if the camera is turned off.
• If you set a departure date and then take a
picture on a date before this departure
date, [-] (minus) is displayed in orange
and the day of the vacation that you took
the picture is not recorded.
• If you set a departure date and then change
the clock setting to the date and time at the
travel destination, [-] (minus) is displayed in
white and the day of the vacation that you
took the picture is recorded when the travel
destination date is, for example, one day
before the departure date.
• If [TRAVEL DATE] is set to [OFF], the
number of days that have passed since
the departure date will not be recorded
even if you set the travel date or the clock.
Even if [TRAVEL DATE] is set to [SET]
after taking the pictures, which day of the
vacation you took them is not displayed.
• If you set a departure date when the clock
is not set, the message [PLEASE SET
THE CLOCK] appears. In this case, set
the clock.
• The [TRAVEL DATE] setting also affects
simple mode [ ].
3
10:00 DEC. 2.2006
VQT0V86ENG.book 55 ページ ２００６年１月３０日 月曜日 午前９時４６分