Panasonic DMC-FX01 User Manual

Page 81

Advertising
background image

Connecting to other equipment

81

VQT0V86

Select [Cancel] to close the messages
and disconnect the camera from the
PC. Set [USB MODE] to [PC] again.

[Windows]
The drive appears in the [My Computer]
folder.
• If you are connecting the camera to a PC

for the first time, the required driver is
installed automatically so that the camera
can be recognized by Windows Plug and
Play. The drive then appears on the
[My Computer] folder.

[Macintosh]
The drive is displayed on the screen.
• The drive is displayed as [LUMIX] when

you connect the camera with no card
inserted.

• The drive is displayed as [NO_NAME] or

[Untitled] when you connect the camera
with a card inserted.

Folder Composition
Folders are displayed as shown in the
following illustration.

1 Folder number
2 File number
3 JPG: pictures

MOV: motion pictures

The items in each folder are as follows.

• The data for up to 999 pictures recorded

by the camera can be included in 1 folder.
If the number of pictures exceeds 999,
another folder is created.

• To reset the file number or the folder

number, select [NO.RESET] in the
[SETUP] menu. (P20)

Conditions under which a different

folder number is used

In the following cases, the picture is not
recorded in the same folder as the
previously recorded picture. It is recorded
in a folder with a new number.
1 When the folder just recorded to contains

a picture file with the number 999 in it
(example: P1000999.JPG).

2 When the card just recorded to contains,

for example, a folder with the number
100 (100_PANA) in it and that card is
removed and replaced with a card that
has a folder with the number 100 in it
recorded by a camera from a different
maker (100XXXXX, with XXXXX being
the name of the maker) and then a
picture is recorded.

3 When recording after selecting

[NO.RESET] (P20) from the [SETUP]
menu. (Pictures will be recorded to a
new folder with a number sequential to
the folder recorded to immediately
before. By using [NO.RESET] on a card
that does not contain folders or pictures,
such as one just formatted, the folder
number can be reset to 100.)

≥SD Memory Card
≥MultiMediaCard

100_PANA

101_PANA

999_PANA

DCIM

MISC

P1000001.JPG

P1000002.JPG

P1000999.JPG

100_PANA

1

2

3

DCIM

Folders from [100_PANA] to
[999_PANA]

100_PANA
to
999_PANA

Pictures/motion pictures

MISC

Files on which the DPOF
print settings are recorded

VQT0V86ENG.book 81 ページ 2006年1月30日 月曜日 午前9時46分

Advertising