Pioneer DEH-P9100R - Manual (Page 66)

65
Initial Settings
S
witching the telephone
muting/attenuation setting
When a call is made or received using a cellular
phone connected to this product, the product
can be set to either mute or attenuate the audio
output.
1. With the source turned off, press and
hold 1.
2. Press MUTE.S to select the telephone
muting/attenuation mode.
3. Press MUTE.S to select the desired set-
ting.
Press MUTE.S repeatedly to switch between
the following settings:
TEL mute
=
10dB ATT
=
20dB ATT
Sound from this product is muted or attenu-
ated automatically when a call is made or
received using a connected cellular tele-
phone.
• “20dB ATT” has a stronger effect than
“10dB ATT”, and “TEL mute” has a
stronger effect than “20dB ATT”.
F
ormatting the “Memory Stick”
When this product can not read an inserted
“Memory Stick”, the “Memory Stick” must be
formatted by this product. Formatting a
“Memory Stick” erases all data stored on it.
Note:
• When formatting, all data will be erased. Always
confirm the contents of the “Memory Stick” before
erasing.
• When purchasing a commercially available
“Memory Stick”, it is already FAT-formatted, so fur-
ther formatting is unnecessary.
1. With the source turned off, press and
hold 1.
2. Press UTLTY to select the format mode.
3. Press OPEN to open the front panel.
4. Insert a “Memory Stick” into the MS load-
ing slot until it clicks into position.
5. Close the front panel.
6. Press
5 to format a “Memory Stick”.
The confirmation screen appears.
7. Press
2 and then press 5 to select “Y”.
When formatting is completed, “Finished” is
displayed.
• If you press
3 3
and
5
to select “N”, format-
ting will be terminated.
MS EJECT button
MS loading slot