Error codes, Understanding auto-equalizing error, Messages – Pioneer DEH-P9100R User Manual

Page 74: Additional information, Nderstanding auto-equalizing error messages

Advertising
background image

73

Additional Information

U

nderstanding auto-equalizing error messages

When correct measurement of car interior acoustic characteristics is not possible using the auto-
equalizer, an error message may appear on the display. If an error message appears on the display,
refer to the table below to see what the problem is and the suggested method of correcting the prob-
lem. After checking, try again.

Display

Cause

Remedy

ERROR CHECK MIC

Microphone is not connected.

Plug the supplied microphone
securely into the jack.

ERROR CHECK SPEAKER

The microphone cannot pick

Confirm that the speakers are

up the measuring tone of the

connected correctly.

front and rear speakers.

Correct the input level setting of the
power amp connected to the
speakers.

Set the microphone correctly.

ERROR CHECK SYSTEM

The surrounding noise level

Stop your car in a place that is as

is too high.

quite as possible, and switch off the
engine, air conditioner or heater.

Set the microphone correctly.

Advertising