Panasonic CF-50 - Manual (Page 15)

15
Getting Star
ted
Depending on the Windows settings, installed applications, and drivers, menus and
other displays may differ, or some functions (such as use of the password reset disk)
may be inoperable. Check with your system administrator for details.
You can select Classic view for the Control Panel or select the Classic Start menu. You
can also change the way a user logs on or off.
The procedure in this manual uses the method or view of the Windows XP default
setting (not Classic view or Classic Start menu etc.).
Resetting the password
Windows XP has a function to reset a forgotten password.
To use this function, you need to create a password reset disk beforehand following the
steps below.
1
Select [start] - [Control Panel] - [User Accounts].
2 Select [Prevent a forgotten password] from [Related Tasks] menu of the account
you used to logon and create a password reset disk following the on-screen instruc-
tions.
Store the password reset disk in a safe place.
· Only the logon password for each account can be reset.
The password set in the Setup Utility ( “Setup Utility”) cannot be reset.
Information for Windows XP
NOTE
After setting up Windows, you can use “Icon Enlarger” to change the size of
the icons, etc. as you like. To use this, select
on the desktop or [Icon En-
larger] in [start] - [All Programs] - [Panasonic].
When creating a new user account:
If you make mail settings, create password reset disks ( below), or conduct
other related operations before creating the user account, you will be unable to
use any previous mail history or settings.
When you create the first new account, you can only select [Computer admin-
istrator].
Once a “Computer Administrator” account has been created, you can create
additional limited user accounts.
Note also that only the added user account will be displayed in the Welcome
screen. The account for the administrator created during Windows setup will
not be displayed.
<Only for the model with a wireless LAN>
If you use the wireless LAN, be sure to refer to the Reference Manual’s “Wire-
less LAN”.
This concludes the first-time use operation guidelines.
<Information for the DVD-ROM & CD-R/RW drive and the DVD MULTI drive>
Before using the drive for the first time, remove the protective sheet from the lens area.
The protective sheet inside the drive delays the opening of the drive by about ten seconds.
This delay is not a problem.
NOTE