Panasonic CF-50 - Manual (Page 32)

32
Appendix
About Regions Setting
CAUTION
The region code can be set a total of five times, including the initial setting. Proceed very carefully, because after the
fourth change has been made, the region code set last is fixed and no further changes can be made.
The user must take responsibility for any trouble that results from illegally changing or altering the region code.
NOTE
[Confirm Region] will also be displayed if a DVD-Video with one region code is inserted into a drive for which another
region code has already been set.
WinDVD
The DVD-Video has a region code that is fixed according to the region where it is sold. In order to play a DVD-Video, the
region code of the player software and of the drive must match that of the DVD-Video.
<Example>
For U.S.A. and Canada: “1”
For Europe: “2”
The region code is not set prior to the shipment of this drive. Therefore, operations will differ depending on the first DVD-
Video played.
In the case of a DVD-Video with a specific region code:
The drive will automatically be set with the same region code as the DVD-Video.
In the case of any other DVD-Video:
[Confirm Region] appears. Select region code and select [OK]. Play now begins.
([Confirm Region] may not be displayed for some DVD-Videos. To confirm the current region code and the number of
settings remaining, right-click on the WinDVD screen and select [Setup] - [Region].)
About Playback of a DVD Created the DVD recorder or DVD MULTI drive
Playable DVD media: DVD-Video, DVD-RAM, DVD-R, DVD-RW
However, the following restrictions apply.
In order to play DVD-R and DVD-RW, it must be finalized (a process that enables it to
play on other DVD players etc.). For information on the finalizing method used by your
DVD recorder, refer to its operating instructions.
The following media can be played only by the user with the administrator’s authority:
• DVD-RW recorded in the VR format
Windows 2000
• DVD-RAM recorded in the VR format
Windows XP
• DVD-RAM formatted in FAT 32
Depending on the DVD recorder or the manufacturer of the media used for creation, it
may not be playable.
Windows 2000
DVD-RAM formatted in FAT 32 cannot be played.
How to access the online manual
Select “?” of the WinDVD control panel.
SUPPORT INFOMATION
If WinDVD does not operate properly, we recommend carefully reading the online help
file first for problems with the operating environment or operations.
If you still cannot troubleshoot the problem, contact InterVideo, Inc.
URL: http://www.intervideo.com/
E-mail: [email protected]