PhatNoise KDC-W6531 User Manual
Page 31
English
|
31
Audio Preset Call
Recalling the sound setup registered by <Audio
Preset Memory> (page 30).
1
Select the source
Press the [SRC] button.
2
Enter Menu mode
Press the [MENU] button for at least 1 second.
"MENU" is displayed.
3
Select Audio Preset mode
Push the Control knob to [FM] or [AM].
Select the "A-PRESET" display.
4
Enter Audio Preset mode
Press the Control knob for at least 1 second.
5
Select the Audio Preset Call
Push the Contol knob to [FM] or [AM].
Select the "CALL" display.
6
Call up the Audio Preset
Press the Control knob for at least 2 seconds.
The "CALL" display blinks 1 time.
7
Exit Menu mode
Press the [MENU] button.
• The User memory of <System Q> (page 10) is
changed to the value which was recalled.
• The source tone memory item of <Audio Control>
(page 10) is changed to the value which was recalled
by the selected source.
In Standby mode
Demonstration mode Setting
Sets the demonstration mode.
1
Select the Demonstration mode
Push the Control knob to [FM] or [AM].
Select the "DEMO" display.
2
Set the Demonstration mode
Press the Control knob for at least 2 seconds.
Each time the knob is pressed at least 2 seconds,
the Demonstration mode switches as shown
below.
Display
Setting
"DEMO ON"
The Demonstration mode function is ON.
"DEMO OFF"
Exit Demonstration mode (Normal mode).