Palm 700P - Manual (Page 14)

S E T T I N G U P
8
1
CH
AP
T
E
R
5 When the language selection screen
appears, select the language you want
to use.
IMPORTANT You must select the same
language on your smartphone and desktop
software.
6 Follow the onscreen instructions to set
up your smartphone.
Charging the battery
The battery comes with a sufficient charge
to complete the setup process and activate
your phone. After activation, we
recommend charging your smartphone for
3.5 hours (or until the indicator light is solid
green) to give it a full charge. See
Maximizing battery life for tips on
maximizing the life of your smartphone’s
battery.
1 If necessary, connect the international
adapter to the AC charger plug.
2 Plug the AC charger into a wall outlet.
3 Connect the charger cable to the
bottom of the smartphone. Make sure
the arrow on the connector is facing up,
toward the screen.
TIP If your smartphone does not turn on, you
need to connect it to the AC charger. If it still
does not turn on after you connect the AC
charger, then do a soft reset. See Performing
a soft reset.
TIP To avoid draining the battery, charge your
smartphone every day, especially if you use
your phone often.
DID YOU KNOW ? If your battery ever becomes
fully drained, your info is still stored safely on
your smartphone until you recharge the
battery or connect your smartphone to a
power source.