Model 3616 dsu switch and jumper locations, Model 3616 dsu switch settings – Paradyne COMSPHERE 3615 User Manual
Page 35
Advertising
Installing the Model 3616 DualFlow DSU
3-3
3615-A2-GB20-20
December 1996
Figure 3-1. Model 3616 DSU Switch and Jumper Locations
Table 3-1
Model 3616 DSU Switch Settings
Switch Position
Switch Setting
Function
S1-1
ON
(default)
Permissive V.32 DBM transmit output level of –9 dBm
S1-1
Off
Programmable V.32 DBM transmit level between –12 dBm and
0 dBm
ON
Frame ground (FG) connected to signal ground (SG)
S1-2
Off
(default)
FG connected to SG through 100 ohm resistor
ON is to the rear as you face the front of the DSU.
Off is to the front.
Advertising
This manual is related to the following products: