Paradyne COMSPHERE 3615 - Manual (Page 58)

COMSPHERE DualFlow Data Service Units
4-14 December 1996 3615-A2-GB20-20
To view the configuration loaded:
.
Procedure
1. Select an option set (e.g., DSU – F2 key).
2. Press the F1 key (Next) to scroll through each
configuration option’s default (factory-loaded)
setting.
The option sets (DSU, DSU Port, DBM, etc.)
scroll from the last to the first (e.g., Diag
!
Bkup
!SAVE!DSU!DSU Port, etc.).
3. Select Prev (press the key to display Prev,
then select it).
4. Press the key to return to the Edit/Save
screen.
You can select another option set to view, or you
can proceed.
Refer to Chapter 5, Configuring the Unit, for an
example showing you how to edit (change)
configuration options.
5. Select Save (F1).
The Save to screen appears.
6. Select Activ (F1).
The selected application’s configuration is saved
to the DSU’s Active operating area, and the
Command Complete message appears.
Configuration Options
The Configuration Options (Opts) subbranch allows
you to save, copy, and/or change configuration options.
Refer to Chapter 5, Configuring the Unit. Chapter 5
fully explains the Opts subbranch, and provides an
example of changing configuration options.
Poll List
The Poll List (PList) subbranch maintains or changes
the DBM’s poll list. A control DBM’s poll list includes
the tributary DSU and DBM one level downstream, and
only a control can acquire a poll list.
You can display, clear, change, or acquire a poll list. If
you select Clr (Clear) from the Poll List screen, all
network addresses are erased from the DBM’s poll list.
PList is only available from the Local branch, and only
to a control DBM configured for nondisruptive
diagnostics (Diag Type is set to NonD).
Displaying the Poll List
To display each of the network addresses included in
the DSU’s poll list:
.
Procedure
1. Select PList (F2).
2. Select Displ (F1). The following screen appears:
F1
A d d r : 2 A c t i v e
F2 F3
The number after Addr (in this example, 2) is the
network address of the poll list member. The
member is identified as either Active or Skip
(identified via the Change Poll List function).
3. Press the F1 or F2 key to display additional
addresses.
4. Press the key to return to the Poll List screen.