Polaris Indy 340 Touring - Manual (Page 46)

43
THE PERFECT FIT
EDGE Touring Suspension (ETS) Adjustments
Torsion Springs
Two torsion springs are used on the rear arm of
the ETS. Preload adjustments can be made by
turning the rectangular adjusters with a spark
plug wrench.
The firm torsion spring should be used if fre-
quent bottoming is encountered during two up
riding on rough trails.
The soft torsion spring should be used for fre-
quent one up riding on smooth trails.
For soft tension, position the long end of the
cam to the front. For firm tension, position the
long end of the cam up.
Front Track Spring and Preload
Front track spring and preload can also be
adjusted. Turn the screw clockwise to
tighten compression (stiffen). Turn the
spring clockwise to tighten preload.
Initial Setup Reference Chart
This chart is only a guideline for initial sus-
pension setup. Your setup may vary based
on your desired riding style.
Torsion
Spring &
Block Setting
RCA
Position
Front Track
Spring Preload
(Inches)
Front Track
Indy Select -
Turns From
Full Open
1 Rider Soft
Firm
Low
Med
1-2
2-3
0.25
0.50
0-1
1-2
2 Riders Soft
Firm
Med
High
3-4
4-5
0.75
1.00 max
1-3
2-3
Optional Torsion Spring Optional Front Track Spring
Lefthand Righthand
Soft
Firm
7042139-067
7042282-067
7042140-067
7042283-067
7041351-067
-------
Soft Tension
Firm Tension
Screw
Spring