Pioneer DEH-P550MP - Manual (Page 22)

Notes
! When playing discs with MP3/WMA files and
audio data (CD-DA) such as CD-EXTRA and
MIXED-MODE CDs, both types can be played
only by switching mode between MP3/WMA
and CD-DA with BAND.
! If you have switched between playback of
MP3/WMA files and audio data (CD-DA), play-
back starts at the first track on the disc.
! The built-in CD player can play back an MP3/
WMA file recorded on CD-ROM. (Refer to
page 46 for files that can be played back.)
! Do not insert anything other than a CD into
the CD loading slot.
! There is sometimes a delay between starting
up playback and the sound being issued. This
is particularly the case when playing back
multi-session and many folders. When being
read in, FRMTREAD is displayed.
! If you cannot insert a disc completely or if
after you insert a disc the disc does not play,
check that the label side of the disc is up.
Press EJECT to eject the disc, and check the
disc for damage before inserting the disc
again.
! Playback is carried out in order of file number.
Folders are skipped if they contain no files. (If
folder 01 (ROOT) contains no files, playback
commences with folder 02.)
! When playing back files recorded as VBR
(variable bit rate) files, the play time will not be
correctly displayed if fast forward or reverse
operations are used.
! If inserted disc contains no files that can be
played back, NO AUDIO is displayed.
! There is no sound on fast forward or reverse.
! If the built-in CD player does not operate prop-
erly, an error message such as ERROR-11
may be displayed. Refer to Understanding
built-in CD player error messages on page 45.
! When an MP3/WMA disc is inserted, folder
name and file name begin to scroll to the left
automatically.
Introduction of advanced
built-in CD player (MP3/
WMA) operation
1
2
1 RPT indicator
Shows when repeat range is selected to cur-
rent track (file).
2 Function display
Shows the function status.
% Press FUNCTION to display the function
names.
Press FUNCTION repeatedly to switch be-
tween the following functions:
RPT (repeat play)RDM (random play)
SCAN (scan play)PAUSE (pause)
FF/REV (search method)TAG (tag display)
# To return to the playback display, press BAND.
Note
If you do not operate the function within about 30
seconds, the display is automatically returned to
the playback display.
Repeating play
For MP3/WMA playback, there are three re-
peat play ranges: FLD (folder repeat), TRK
(one-track repeat) and DSC (repeat all tracks).
MP3/WMA Player
En
22
Section
06
HHHHHHHHHHHHHH