Selecting treble frequency 37, Adjusting loudness 37 using subwoofer output 37, Adjusting subwoofer settings 37 – Pioneer DEH-P550MP User Manual

Page 37: Adjusting loudness, Using subwoofer output, Audio adjustments

Advertising
background image

Selecting treble frequency

You can select the treble frequency for level

adjustment.

1 Press AUDIO and hold until frequency

and the Q factor (e.g., F- 80:Q1W) appears

in the display.

2 Press AUDIO to select T.

Press AUDIO until T appears in the display.

3 Press c or d to select the desired fre-

quency.

Press c or d until the desired frequency ap-

pears in the display.

2k4k6k10k (Hz)

Adjusting loudness

Loudness compensates for deficiencies in the

low- and high-sound ranges at low volume.

1 Press AUDIO to select LOUD.

Press AUDIO until LOUD appears in the dis-

play.

2 Press a to turn loudness on.

Loudness level (e.g., LOUD :MID) appears in

the display.

3 Press c or d to select a desired level.

Each press of c or d selects level in the fol-

lowing order:

LOW (low)MID (mid)HI (high)

4 Press b to turn loudness off.

LOUD :OFF appears in the display.

Using subwoofer output

This unit is equipped with a subwoofer output

which can be turned on or off.

1 Press AUDIO to select SUB, W.

Press AUDIO until SUB, W appears in the dis-

play.

# When the subwoofer controller setting is
P/O :FUL, you cannot select SUB, W.

2 Press a to turn subwoofer output on.

SUB, W:NOR appears in the display. Subwoo-

fer output is now on.

# If the subwoofer output phase has been set to
the reverse, SUB, W:REV will be displayed.
# To turn subwoofer output off, press b.

3 Press c or d to select the phase of sub-

woofer output.

Press c to select reverse phase and REV ap-

pears in the display. Press d to select normal

phase and NOR appears in the display.

Adjusting subwoofer settings

When the subwoofer output is on, you can ad-

just the cut-off frequency and the output level

of the subwoofer.

1 Press AUDIO to select 80: 0.

Press AUDIO until 80: 0 appears in the dis-

play.

# When the subwoofer output is on, you can se-
lect 80: 0.
# If the subwoofer setting has been previously
adjusted, the frequency of that previously se-
lected will be displayed instead of 80.

2 Press c or d to select cut-off frequency.

Each press of c or d selects cut-off frequen-

cies in the following order:

5080125 (Hz)

Only frequencies lower than those in the se-

lected range are output from the subwoofer.

Audio Adjustments

En

37

English

Section

08

HHHHHHHHHHHHHH

Advertising