Adjusting bass and treble 36, Adjusting bass and treble level 36, Selecting bass frequency 36 – Pioneer DEH-P550MP User Manual

Page 36: Adjusting bass and treble, Audio adjustments, Adjusting bass and treble level, Selecting bass frequency

Advertising
background image

2 Press AUDIO to select the band for ad-

justment from among low, mid and high.

Press AUDIO repeatedly to switch between

the following functions:

LowMidHighB (bass adjustment)T

(treble adjustment)

# If EQ-EX function has been selected and only
when EQ-EX is turned on and CUSTOM is se-
lected as the equalizer curve, you can switch to B
and T.

3 Press c or d to select the desired fre-

quency.

Press c or d until the desired frequency ap-

pears in the display.

Low: 4080100160 (Hz)

Mid: 2005001k2k (Hz)

High: 3k8k10k12k (Hz)

4 Press a or b to select the desired Q fac-

tor.

Press a or b until the desired Q factor ap-

pears in the display.

2N1N1W2W

Note

If you make adjustments, CUSTOM curve is up-
dated.

Adjusting bass and treble

You can adjust bass and treble settings.

! If EQ-EX function has been selected and

only when EQ-EX is turned on and

CUSTOM is selected as the equalizer

curve, you can adjust bass and treble set-

tings.

! If SFEQ has been set to FRT1, bass adjust-

ment affects only the rear output: front out-

put cannot be adjusted.

! If SFEQ has been set to FRT1 or FRT2, tre-

ble adjustment affects only the front out-

put: rear output cannot be adjusted.

Adjusting bass and treble level

You can adjust the bass and treble level.

1 Press AUDIO to select B.

Press AUDIO until B appears in the display.

# If the treble level has been previously ad-
justed, T will be displayed.

2 Press c or d to select bass or treble.

Press c and B is displayed. Press d and T is

displayed.

3 Press a or b to adjust the level.

Each press of a or b increases or decreases

the selected bass or treble level. +6  6 is dis-

played as the level is increased or decreased.

Selecting bass frequency

You can select the bass frequency for level ad-

justment.

1 Press AUDIO and hold until frequency

and the Q factor (e.g., F- 80:Q1W) appears

in the display.

2 Press AUDIO to select B.

Press AUDIO until B appears in the display.

3 Press c or d to select the desired fre-

quency.

Press c or d until the desired frequency ap-

pears in the display.

4063100160 (Hz)

Audio Adjustments

En

36

Section

08

HHHHHHHHHHHHHH

Advertising