Product information, Safety guidelines – Planar BAT24SI User Manual

Page 4

Advertising
background image

iv

Planar Battery System BAT24SI

QUICK LINKS

Contents

Index

Regulatory Compliance

Product Information

Warranty

GETTING STARTED

About the Battery System

Battery Components

Identify Connector Ports

Install Fuses

USING THE BATTERY

Charge Battery

Set Up Power Management

MAINTAINING THE BATTERY

Replace Battery

Troubleshooting

APPENDIXES

Battery Disposal

Specifications

Product Information

Safety guidelines

The Planar battery system is designed to ensure both the highest level of product quality
and safety for the user. To maintain both quality and safety, follow the guidelines and
instructions in this manual.

Use the battery system only as intended.

Do not place the battery system near a window. Exposing the system to rain,

water, moisture or constant direct sunlight can severely damage it.

Do not cover or obstruct any venting holes on the battery system.

Store the battery system within –20 to +65 degrees Celsius. Storing the system

outside that temperature range could result in permanent damage.

If any cord or cable is frayed or damaged, replace it immediately with another of

the same type and rating as supplied by Planar. The safety and regulatory listing and
certifications are based on cables supplied by Planar.

Use and maintain the safety ground plug set (power cord) included with the unit.

After battery system installation, secure all electrical cords to prevent

accidental damage.

To clean the exterior chassis of the battery system, follow the IEC 60601 standard for

use in a hospital environment. See

cleaning guidelines

for more information.

Before cleaning the chassis, disconnect the unit from its power source.

Be careful when moving the battery system to a different location.

Use original packaging whenever possible.

Warning

• Equipment is not suitable for use

in the presence of a flammable
anesthetic mixture with air,
oxygen, or nitrous oxide.

• The Planar battery system

may be energized or operational
even when disconnected from
the AC power source.

• If the Planar battery system has

been exposed to liquid, has been
dropped, or if its base has been
damaged, it may pose a shock or
fire hazard. Immediately unplug it
and contact customer service for
assistance.

• Use care in handling the battery if

any leakage is observed. Avoid
skin contact and wash any areas
that come in contact with this
material immediately.

• Plug the battery system only into

a grounded power outlet.

Advertising