Piega SUB 1 MKII - Manual (Page 5)

Procedure:
>Before unpacking, remove any jewelry such as watches, rings,
bracelets etc. in order to avoid scratching the aluminum
>Open the carton as shown in the figure and remove the supply
cable provided. Leave the protective cushion
>Carefully invert the subwoofer 180° with the carton open
and stand it on the protective cushion so that the carton can be
lifted up and off the loudspeaker
>Remove th protective foil and the upper protective cushion
and turn the subwoofer over 180° once more so that it is standing
on the feet provided
>Check that the P SUB 1 MKII has not been damaged in transit
>Then place the P SUB 1 MKII in the required position
Special care was taken in the packaging of your P SUB 1 MKII in order to ensure that this new PIEGA quality product reaches your
living room safely and undamaged. In order to avoid any damage when unpacking the loudspeaker, follow closely the instructions
below.
PIEGA P SUB 1 MKII
Instructions for unpacking...
Unpacking the P SUB 1 MKII
5
Warning:
The P SUB 1 MKII subwoofer weighs 42 kg and is therefore very heavy.
>To avoid risk of injury only lift the subwoofer together with another person...!