Piega SUB 1 MKII - Manual (Page 8)

8
CROSSOVER
FREQUENCY
40Hz 140Hz
LFE / IN
INPUT
OUTPUT
L R
60Hz
Subwoofer L
R
Front R Rear R Center Rear L Front L
Amplifier
Front
Speaker R
Front
Speaker L
Center
Speaker
Rear
Speaker R
Rear
Speaker L
L+
L-
R+
R-
SPEAKER LEVEL INPUTS
The most frequently used and ideal connection configuration for 5.1 surround applications is using an AV receiver with a separate
subwoofer output. The settings can be adjusted individually for any loudspeaker via the menu. Refer to the user manual of the AV
receiver you are using for information on the individual setup controls.
Connecting the System
Benefit:
The most frequently used and ideal
connection configuration for 5.1 surround mode
>The P SUB 1 MKII can be tuned for optimum results...!
Connection:
>Connect the P SUB 1 MKII cable to the terminal
marked SUBWOOFER (or similar) on the AV receiver
>Connect the P SUB 1 MKII cable to the terminal on the
subwoofer marked LFE/IN
>For this use a suitable connection cable with
cinch plugs (not supplied with the loudspeakers)
>Connect the front, rear and center loudspeakers using the
loudspeaker terminals provided on your AV receiver
PIEGA P SUB 1 MKII
Configuration example for surround mode
Dolby Digital System - Surround System with AV Receiver