Pixel Magic Systems VPS3800 - Manual (Page 38)

• When overscan is smaller than zero, the image is reduced in size and borders are filled
with the background color (see Section 5.2.7 on how to change the background color)
• Use the Left/Right arrow remote control keys to adjust the slider
• When OK is pressed on the remote control, the whole OSD is hidden and only the slider
control is shown at the lower left corner of the display
• Pressing Back on the remote control will return you to the full OSD, or simply press the
Menu key to exit from OSD mode
5.2.6 POSITION
This option is used to move the image.
• Use the Left/Right/Up/Down arrow remote control keys to move the image
• The two figures shown indicate the relative position of the image with reference to the
center of screen
5.2.7 CROP
This option is used to crop the source video.
When the action button is pressed, the OSD turns to the following page:
• When Top/Bottom/Left/Right is greater than zero, the corresponding side of the source
video is cropped and background color is shown instead of source video
38