Pixel Magic Systems VPS3800 - Manual (Page 40)

• NTSC@30: Crystalio II will automatically select the deinterlacing method from one of the below:
• DCDi
• 3:2 reverse pulldown
• 2:2 reverse pulldown (PAL and NTSC)
• 2:2 Even: Crystalio II will only use 2:2 reverse pulldown (even)
• 2:2 Odd: Crystalio II will only use 2:2 reverse pulldown (odd)
5.2.9 NOISE REDUCER
This option can be use to remove noise from the source video.
• Off will produce the best image quality from good video sources
• Low or Medium may help reduce noise from TV broadcasts or from most analogue
sources
• High or Super would normally only be required for exceptionally noisy video sources
• Setting excessively high noise reducer levels may soften the picture
• VXP Noise Reducer is available for SD (Standard Definition 480i etc) video and HD (High
Definition 1080i etc) video
5.2.10 DCDi
You can opt to disable the FLI2300 DCDi deinterlacing. If DCDi is disabled, all processing
options of the Faroudja FLI2300 are disabled.
Crystalio II will use Faroudja FLI2300 deinterlacing when:
• DCDi option is set to "Enabled", and
• Input video source is SD (standard definition video), and
• Output refresh rate is not 24/48/72 Hz
40