Planet Technology WAP-1966 - Manual (Page 16)

- 11 -
Password: Enter the new password in the "AP Password New" field and again in the next field to
confirm. Click on "Apply" to execute the password change. The Password is case-sensitive, and can
be made up of any keyboard characters. The new password must be between 0 and 15 characters
in length.
MAC Filters: Filter function is for the administrator to authorize who can gain network access
through the Access Point by using MAC address filtering. By choosing the Allow radio button, only
MAC addresses in the Authorization table will be allowed to communicate with the Access Point. By
choosing the Deny radio button, any MAC address in the table will be denied association with the
Access Point. You can have up to 50 MAC addresses configured on it.
3.1.7 802.1x
This screen enables you to configure 802.1X authentication.