Planet Technology WAP-1966 - Manual (Page 9)

- 4 -
Chapter 3 Configuring the Wireless Access Point
3.1 Configure through Web Browser
Web configuration provides a user-friendly graphical user interface (web pages) to manage your
WAP-1966. An AP with an assigned IP address (e.g. http://192.168.1.1) will allow you to monitor and
configure via web browser (e.g., MS Internet Explorer or Netscape).
1. Open your web browser.
2. Enter the IP address of your WAP-1966 in the address field (default IP address is http://192.168.1.1 ).
Please note that your PC ’s IP address should be on the same IP subnet of the WAP-1966. For
example, you can configure your PC ’s IP address to 192.168.1.2 if WAP-1966 is with IP 192.168.1.1.
3. A User Name and Password dialog box will appear. Please enter your User Name and Password here.
Default User Name and Password are both “admin”. Click Ok.
4. Then you will see the WAP-1966 web configuration page.
3.1.1 Wizard
Setup wizard provides a simple way to configure your WAP-1966. Clicking “Wizard” button on top panel
of WAP-1966 ’s web page, Setup Wizard will pop up as below..
To quick configure WAP-1966, please follow the steps below to complete the configuration. Click
“Next>” to continue.
Step 1. Set your new password