Pride Mobility Dynamic DX - Manual (Page 4)

4 Basic Operation Manual SCR
INTRODUCTION
Welcome to Quantum Rehab, a Division of Pride Mobility Products
Corporation. Quantum Rehab is dedicated to the customization of power
chairs for users with advanced rehabilitation and mobility issues. Quantum
Rehab also expands possibilities for enhanced healthcare attendant control
over power chair functions to provide a secondary level of support for our
customers where necessary.
The Dynamic DX Specialty Controls Remote (SCR)
The Dynamic DX Specialty Controls Remote (SCR) allows users to control
a wide range of on-chair and off-chair functions. SCR units come pre-
programmed in the Standard Mode Configuration explained in this manual,
but are not limited to it. Please contact your authorized provider for more
information on programming alternatives.
The SCR is used in conjunction with input devices such as joysticks, touch
pads, lap trays, head arrays, Buddy Buttons, Sip-N-Puff systems, etc. The
purpose of the SCR is to enhance and expand input device function, so that
the user can do more with his/her power chair.
This manual is designed to explain basic operation for the following functions:
1. SCR Controls
- Utilizes the On/Off Switch and the Mode Switch to power the SCR and
choose pre-programmed functions.
2. Standard Mode Configuration
- Allows the user to choose and control the driving speed of his/her power
chair using one of five modes.
3. Timeout Function
- This is a safety feature built in to the programming of the SCR.
4. Seat Control
- Allows the user to control seat actuator adjustment.