Pride Mobility Dynamic DX - Manual (Page 7)

SCR Basic Operation Manual 7
TIMEOUT FUNCTION
The timeout function is a safety feature in the nature of an “automatic sleep”
mode. When the SCR is powered up, the user has ten seconds to begin driving
the power chair. If the user begins driving the power chair within ten seconds
of power up, the timeout function is suspended until the unit is stationary
again. If the user does not begin driving the power chair within ten seconds
of power up, the timeout function automatically exits to the Main Screen
Display.
SEAT CONTROL
Executing a “Next” command with the input device when in Drive Mode 5
moves the SCR to the Seat Control Menu. See figure 3. To enter the Seat
Control Mode, choose the “Yes” option. In this mode, the user can control
the adjustment of the available seat actuators, including Tilt, Recline, Left
Leg Rest, and Right Leg Rest. Each
mode will prompt the user to
choose one of four options (see
figures 4-7):
Tilt Mode
1. Down (up arrow)
-Returns the seat to an upright
position.
2. Up (down arrow)
-Adjusts the actuator to the
desired tilted position.
3. Exit (left arrow)
-Returns the SCR to the Seat
Control Menu
4. Next (right arrow)
-Moves the SCR to the next
actuator option.
SEAT CONTROL
PREVIOUS
YES
NEXT
Figure 3. Seat Control Selection
SEAT CONTROL
EXIT
DOWN UP
NEXT
TILT
Figure 4. Tilt Mode Selection