Chapter 2 logon vip-2100, Logon vip-2100 – Planet Technology VIP-2100 User Manual
Page 16
VIP-2100 User
’s manual
- 11 -
Chapter 2 Logon VIP-2100
After connected E1/T1 & Ethernet cables into the VIP-2100, turned on
the power. The first step is to logon the system and set up the IP address.
Before you can use the Browser to setup VIP-2100, you need to have
Java Standard Runtime (1_4_1_02) to make it work. Please refer to
Appendix 2 Java plug-in Install
for detail.
Logon VIP-2100
Setp1: Start IE5.0 (or later version) to navigate VIP-2100 Management
System by typing the default IP address (the default URL is
). The screen will display User ID and
Password as figure 2.1-1.
Figure 2.1-1
☻Note: The default network IP address is 192.168.111.111 and subnet
mask is
255.255.0.0
Step 2: Enter log user name and password (the
default user id is root
and
u
ser password is root
). You can manage your user account via web
(refer to Section
“
Account Manager
”) later.
Figure 2.1-2