Planet Technology VIP-2100 - Manual (Page 18)

VIP-2100 User ’s manual - 13 -
Step 2: Enter the deserved IP address, Submask and default gateway. Apply
the change by clicking apply button as figure 2.2-2.
Figure 2.2-2
Step 3: When screen shows
“Setup network configuration successfully!”
It means the IP Network setting is successfully changed as figure 2.2-
3.
Figure 2.2-3
☻Note: “Network Control” takes around 5-second to apply the new
network configuration. Please logon again with new IP address
after 5 seconds.
System Time Configuration
Step 1: When re-logon to the new IP address; the next is to setup the system
time zone. Click Control→System Time Zone to setup the system
as figure 2.3-1.
Figure 2.3-1
Step 2: After apply the new time zone, click Back to adjust the date and time
as figure 2.3-2.