Planet Technology VIP-2100 - Manual (Page 66)

VIP-2100 User ’s manual - 61 -
o Disable: Don
’t use Fast Start.
o Enable Fast Start Both Site: Use Fast Start for incoming call and
outgoing H.323 calls
o Fast Start-H.323 incoming only: Enable Fast Start for H.323
incoming calls only
o Fast Start-H.323 outgoing only: Enable Fast Start for H.323
outgoing calls only.
o Early H.245: Use Early H.245
•
H.245 Tunneling: Transfer the H.245 message over the Q.931 channel
•
H.450 Service: Enable the H.450 calls transfer service
•
FS Enable 1-6 (Codec Priority 1-6): Enable Fast Start codec selection
for each codec
•
Inbound DM Group: Digit Manipulation Group for H.323 incoming calls
•
Outbound DM Group: Digit Manipulation Group for H.323 outgoing
calls
Advance H.323 Configuration:
Start Path: Configuration→H.323 →Advance
Figure 7.5-2
Advance Parameter Description:
•
RAS Multicast IP: RAS multicast IP for Gatekeeper searching
•
RAS Multicast Port: RAS multicast Port for Gatekeeper searching
•
Max Call: The maximum H.323 calls
•
Max Channel: The maximum channel of each H.323 call
•
RAS Port: Local RAS port (default: 1719)
•
Q.931 Port: Local TCP port number of Q.931
•
T.38 ECM Mode: T.38 Error Correction Mode
o
T.38 ECM Interoperable mode
o T.38 ECM Backward Compatible Mode
•
FAX Rdepth: T.38 relay redundancy packet depth for high-speed mode.
•
H.245 Option: Separate the H.245 channel in the call of the Fast Start
mode or not.
•
G.723 Psize: G.723 transmission packet size in ms (default: 30ms)
•
G.729 Psize: G.729 transmission packet size in ms (default: 20ms)