Palsonic TVP-342 - Manual (Page 10)

1 Select "CHANNEL SET UP"
Press MENU button repeatedly
to point to "CHANNEL SET
UP".
Then, press SEL. button
2 Select "MANUAL PRESET"
Press MENU button to point to
"MANUAL PRESET".
Press SEL. button.
3 Enter the desired channel number
Press C/P or button
repeatedly until your desired
channel number is appeared.
(You can also use the number
buttons to enter it)
NOTES:
If selected channel is in "SKIP" mode, press
ADD/DELETE button to set the channel range.
When you will select the band, press MEMORY
button. The mode will change VHFL, VHFH, UHF.
4 Set the receiving channel
Press VOLUME or button
to set the receiving channel.
NOTES:
When you will select the band,
keep pressing VOLUME or
button. The mode will
change VHFL, VHFH, UHF.
To memorise another channel, repeat steps [3] and
[4].
5 Memorising the selected channel
Press MENU button to memorise the selected channel.
MANUAL SET UP
MANUAL PRESET
10
MANUAL SET UP
-CHANNEL SET UP-
AUTO PRESET
MANUAL SET UP
-MENU-
TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
USER SET UP
.
.
.
.
VHFL 2
VHFL 1