Palsonic TVP-342 - Manual (Page 13)

TV OPERATION
1 Turn on the TV/VCR
Press POWER switch on the back of the TV/VCR to
switch to "ON". Press FUNCTION button to turn on
the TV/VCR.
2 Select the channel number
Press C/P or button to select
your desired channel number.
3 Adjust the volume is you need
Press VOLUME or button
to adjust the volume.
This function enables you to adjust the TV screen
making it suitable for use with a TV GAME.
Make sure . . .
You must use the remote control unit for the following steps:
1 Select "USER’S SET UP"
Press MENU button repeatedly
to point to "USER’S SET UP".
Then, press SEL. button.
2 Set "GAME MODE" to [ON]
Press C/P or button
repeatedly until [ON] is appeared.
3 Exit the Game mode
Press MENU button repeatedly until the TV/VCR
return to the TV mode.
TO CANCEL, THE GAME MODE
Repeat step [1] Then, step [2] to select [OFF]. Press
MENU button to return to TV mode.
The TV/VCR’s picture controls - BRIGHTNESS,
CONTRAST, COLOUR and SHARPNESS - are
preset to the factory specification. This is usually best,
but if you need to make any further adjustments adjust
picture controls for a natural looking image.
NOTES:
Procedures must be followed within 5 seconds.
Otherwise the Picture Control mode will be cancelled.
When setting the Picture Control, the Game mode
will be automatically set to [OFF].
Make sure . . .
You must use the remote control unit for the
following steps:
1 Select "PICTURE CONTROL"
Press MENU button repeatedly
to point to "PICTURE
CONTROL"
Then, press SEL. button.
2 Select item you want to adjust
Press SEL. button repeatedly until desired control is
displayed.
Each time you press SEL. button,
"BRIGHT", "CONTRAST",
"COLOUR" and “SHARPNESS"
will appear on the TV screen in
sequence.
3 Adjust the picture control
Press C/P or button to adjust the picture control
to your desired level.
BRIGHT
to decrease
brightness to increase
brightness
CONTRAST
to decrease
contrast to increase
contrast
COLOR to pale to brilliant
TINT to purple to green
SHARPNESS to soft to clear
NOTE: "TINT" will appear on the TV screen, only
when an external input signal is used and a NTSC
recorded tape is played back.
WATCHING A TV PROGRAM PICTURE CONTROL
GAME MODE
CH06
13
-MENU-
TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
USER SET UP
BRIGHT
VOLUME 20
-MENU-
TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
USER SET UP
-USERS SET UP-
GAME MODE [ON]
RENTAL [OFF]
REPEAT PLAY [OFF]
AUTO RETURN [OFF]
.
.
C/P C/P