Palsonic TVP-342 - Manual (Page 17)

RECORDING
Make sure . . .
Power must be turned on.
Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the
point at which you want to begin recording.)
You can only watch the same TV program that is being
recorded.
1 Select the channel to be recorded
Press number buttons on the
remote control or the C/P or
button.
2 Select the tape speed
Press SPEED button to select the
desired tape speed (SP/LP).
3 Begin recording
Press REC button. The REC
indicator flashes.
4 Stop recording
Press STOP button when recording is completed.
Press PAUSE/STILL button to
temporarily stop recording. The
REC indicator blinks.
Press PAUSE/STILL or REC
button to resume recording.
NOTES:
To prevent tape damage, after five minutes, the
TV/VCR will automatically return to the Recording
mode.
When in the Pause/Still mode, a display showing 5
" " marks will appear on the screen. Each " " mark
represents one minute of Pause time. You may refer
to this display for remaining pause time available.
NORMAL RECORDING
CH10
SP
SP
REC
17
SKIPPING SOME MATERIALS
DURING RECORDING
SP
PAUSE
.
.
.
.