Pioneer DV-F727 - Manual (Page 30)

30
3
Move the cursor control joystick down to
select [Add Disc Update].
4
Press ENTER.
Add. Update begins and the rack starts to rotate as
each new disc is read by the player. It takes
between 10 and 20 seconds for the player to read a
single disc.
5
Input the title of the disc and the artist’s name
as described in the section “Inputting and
Changing Text Information” on pages 31 to 34.
• If the disc already contains text information on it,
the information is automatically used for the disc
title and artist name, and the confirmation screen
is automatically displayed. When this is the case,
press NEXT
¢ (¡ ¢ on the front panel) to
proceed to the next disc.
• With some DVDs that already contain text
information, there may be several options to
choose from. When this is the case, a selection
window appears.
• After both the disc title and artist’s name have
been entered, a confirmation screen appears.
6
When the confirmation screen appears, press
NEXT
¢ (¡ ¢ on the front panel) to
proceed to the next disc.
• If you would like to go back and change either the
disc title or artist’s name at this time, move the
cursor control joystick right or left to select the
appropriate field and then press ENTER to return
to the text input screen.
• If you would like to change the disc title or artist’s
name when the text information is already on the
disc, go to the text input screen from the
confirmation screen and input the new text
information with a space “ ” for the first
character. The new text information will be
stored in memory.
• When all the newly loaded discs in the rack has
been registered, the system restarts.
Disc
Management
Text Auto Update Custom
Add. Disc Update
New disc update, title/artist info input
The system resets when finished
All Disc Update
i
Move SUB SETUP Exit ENTER Select This player makes it easy to manage all the discs in the
player. The Sub Setup screen contains three menu
screens that allow you to organize your disc library as
you see fit. This section outlines the basic operation of
the Sub Setup screen menus.
Note
If the Sub Setup screen is opened during playback of a DVD
being viewed in the letter box format, the screen may switch to
the wide screen format. This is not a malfunction, and the screen
will return to normal when the Sub Setup screen is closed.
Registering Information and
Inputting Text for Discs Newly
Loaded in the Player
After you have loaded discs in the player for the first
time, it is recommended to have the player register the
information such as text, and disc format data from all of
the discs in the rack.
It is recommended to use [Add. Disc Update] whenever
new discs are loaded in the player .
• This function cannot be performed while a disc is
playing. Stop playback of the disc before proceeding.
1
Press SUB SETUP.
2
Move the cursor control joystick to the right to
select the Auto Update menu.
Title Artist
1 DVD Silver Skies Matt Jones
Type Disc
STOP
Next
Cancel ENTER Input
4 ¢
Text Auto Update: Add Custom
Move
4 ¢ 1
8 7
e E
¡
3
4
(ENTER)
6
2,3
(Cursor)
1