Pioneer DV-F727 - Manual (Page 54)

54
Viewing from a Desired
Camera Angle (Multi-Angle)
– DVD
You can select a camera angle when viewing DVDs with
the multi-angle option.
Press ANGLE during playback.
The camera angle changes each time you press the
button.
Notes
• You can use the Multi-Angle function only with discs featuring
recordings of images shot from different camera angles.
• During Multi-Angle playback, the ANGLE indicator in the
display lights.
• For some discs, selection can be made using the DVD menu.
In this case, press MENU to display the DVD menu screen and
then make your selection.
To check whether or not a disc is recorded with
angles:
The jacket of discs that are recorded with angles will be marked
with
. When locations on discs that are recorded with angles
are played back, the indicator can be displayed.
To cancel the angle mark, set [Angle Indicator] to “Off” in the
Setup screen Video menu described in the section below.
Turning the angle indicator on and
off
Expert
When a picture recorded in different angles is played
back,
is displayed on the screen. This setting lets
you see clearly whether the playback picture is recorded
in multiple angles or not.
Turn the angle indicator on or off in the [Angle Indicator]
setting in the Setup screen Video menu in the “Expert”
menu mode (page 40).
Settings: On* ( is displayed)
Off (Not displayed)
* Factory setting
Note
Even when the [Angle Indicator] setting is set to “Off”, the
ANGLE indicator in the display panel of the player lights during
multi-angle playback. Therefore, it is possible to know when the
multi-angle function can be used without having to display the
icon on the screen.
Off
TV Screen –
Still Picture –
On Screen Display – On
OSD Position – Normal
Angle Indicator
Audio1 General Language Video 2
Move Exit
16:9(Wide)
Field
On
SETUP
4 ¢ 1
8 7
e E
¡
3
ANGLE
ANGLE : 2/4
ANGLE : 3/4
ANGLE : 1/4
ANGLE : 4/4
\
« »
|