Panasonic CF-T5 Series User Manual
Page 21
21
G
ett
in
g S
ta
rte
d
U
se
ful
In
formati
on
Trouble
s
hooting
Appendi
x
3
Press the RAM module down until the right and left hooks (D)
lock into place.
z
When pressing down the module, the right and left hooks will open slightly and
will return after locking.
z
If it is hard to press down the RAM module, do not try forcibly but check the
module’s direction.
4
Set the cover and battery pack back.
NOTE
z
If the RAM module is recognized correctly, the total size of this computer’s memory and RAM module memory is dis-
played on the [Information] menu of the Setup Utility.
If the RAM module is not recognized, turn off the computer and insert it again.
1
Carefully open the left and right hooks (E).
The RAM module will be raised.
2
Carefully remove the RAM module from the slot.
3
Set the cover and battery pack back.
Removing the RAM Module
CF-T5mk2.book 21 ページ ２００６年９月２９日 金曜日 午前８時３４分