Panasonic RX-D26 - Manual (Page 2)

RQTT0622
2
(R14/LR14, C, UM-2)
Power sources
Using a household mains socket Using batteries (not included)
FOR UNITED KINGDOM ONLY
READ THE CAUTION FOR THE AC MAINS LEAD ON PAGE 7
BEFORE CONNECTION.
Connect the AC mains lead firmly to the unit and the outlet.
Note
The included AC mains lead is for use with this unit only. Do not use it
with other equipment.
The unit cannot be powered by batteries if the AC mains lead is
connected.
When to change the batteries
When the battery indicator begins flashing, replace all 6 of the batteries.
It is also a good idea to replace all the batteries before recording.
Inner row
Outer row
Note
Before playing starts the battery indicator may flash although the
batteries are not drained. It appears correctly once you start play.
Removing the batteries
Open the battery cover and insert
your finger in the hole on the bottom
of the unit and push out.
These speakers do not have magnetic shielding. Do not place
them near televisions, personal computers or other devices
easily influenced by magnetism.
Tape mode/standby switch
(TAPE/OFF)
Tune mode select/CD play mode
select/program button
(TUNE MODE •CD PLAY MODE –PGM )
Tuning/CD skip, search buttons
( , )
CD play/pause button ( CD )
CD lid
Tuner mode/band select/auto preset button
(TUNER/BAND –AUTO PRESET)
CD Iid open/close
( CD OPEN/CLOSE)
Volume control buttons
(VOLUME , )
Display
Sound equalizer select
/sound virtualizer button
(• SOUND EQ –S.VIRTUALIZER)
CD stop/clear/FM mode select button
( /CLEAR FM MODE)
Record button ( )
Tape play button ( PLAY)
Rewind/review button
( REW/REV)
Fast-forward/cue button
( FF/CUE)
Stop/eject button ( STOP/EJECT)
Pause button ( PAUSE)
Speaker
Cassette deck
Press [TAPE/OFF] and stop the tape to
turn the unit off.
The unit is in the standby condition when
the AC power supply cord is connected.
The primary circuit is always “live” as long
as the power cord is connected to an
electrical outlet.
Controls
For areas except for United Kingdom, Continental Europe,
Australia and New Zealand
Set the voltage before connection.
Use a flat head screwdriver to turn [VOLT ADJ] to the voltage setting
for your area.
Note that the unit will be seriously damaged or fail to operate correctly
if this setting is not made correctly.
VOLT ADJ
For areas except for
United Kingdom,
Continental Europe,
Australia and
New Zealand
To household
mains socket
AC mains lead (included)
04.1.29, 14:16 Page 2