Panasonic KX-FHD332 - Manual (Page 31)

Initial Programming
31
For Fax Advantage assistance, call 1-800-435-7329.
Setting your logo
The logo can be your company, division or name.
1
Press {MENU}.
SYSTEM SET UP
PRESS NAVI.[
( )]
2
Press {<} or {>} until the following is
displayed.
YOUR LOGO
PRESS SET
3
Press {SET}.
LOGO=
4
Enter your logo, up to 30 characters, using
the dial keypad. See page 32 for details.
Example: “BILL”
1. Press {2} 2 times.
L Cursor ( | ) will appear on the display.
LOGO= | B
2. Press {4} 3 times.
LOGO=B | I
3. Press {5} 3 times.
LOGO=BI | L
4. Press {>} to move the cursor to the
next space and press {5} 3 times.
LOGO=BIL | L
5
Press {SET}.
L The next feature will be displayed.
6
Press {MENU}.
Note:
L You can enter your logo by pressing {+} or
{-} in step 4. In this case, press {>} to
move the cursor (see page 32 for details).
To change capital or lower-case letters
Pressing the {#} key will change to capital or
lower-case alternately.
1. Press {2} 2 times.
LOGO= | B
2. Press {4} 3 times.
LOGO=B | I
3. Press {#}.
LOGO=B | i
4. Press {5} 3 times.
LOGO=Bi | l
To correct a mistake
Press {<} or {>} to move the cursor to the
incorrect character, and make the correction.
To delete a character
Press {<} or {>} to move the cursor to the
character you want to delete and press {STOP}.
To insert a character
1. Press {<} or {>} to move the cursor to the
position to the right of where you want to
insert the character.
2. Press {MUTE} to insert a space and enter
the character.
{SET} {<}{>}{+}{-}
{STOP}
(Delete)
{FLASH}
(Hyphen)
{MUTE}
(Insert)
{MENU}