Panasonic KX-FHD332 - Manual (Page 35)

Automatic Dialing
35
Storing names and telephone numbers into
navigator directory
For rapid access to frequently dialed numbers, the unit provides the navigator directory (100 entries).
1
Press {MENU} repeatedly until the
following is displayed.
DIRECTORY SET
PRESS STATION OR
b
DIRECTORY SET
PRESS NAVI.
2
Press {>}.
NAME=
STORE:PRESS SET
3
Enter the name, up to 10 characters (see
page 32 for instructions).
Example: NAME=ALICE
STORE:PRESS SET
4
Press {SET}.
NO.=
5
Enter the telephone number, up to 30 digits,
using the dial keypad.
Example: NO.=5552233
L If you want to enter a hyphen, press
{FLASH}.
6
Press {SET}.
REGISTERED
u
NAME=
STORE:PRESS SET
L To program other entries, repeat steps 3
to 6.
7
Press {MENU} to exit the program.
Helpful hint:
L For your convenience, HELP-FAX (1-800-
435-7329) has been pre-programmed. If you
cannot solve a problem, call using this entry
(page 38). If unnecessary, you can erase it
(page 37).
L You can confirm the stored entries in the
telephone number list (page 79).
Note:
L When the following is displayed in step 6, you
can store only 5 more entries.
REGISTERED
SPACE= 5 DIRS.
L If there is no space to store new entries, the
following is displayed in step 6. Erase
unnecessary entries (page 37).
REGISTERED
DIRECTORY FULL
L A hyphen or a space entered in a telephone
number counts as two digits.
To correct a mistake
Press {<} or {>} to move the cursor to the
incorrect character/number, and then make the
correction.
To delete a character/number
Press {<} or {>} to move the cursor to the
character/number you want to delete, and press
{STOP}.
{SET} {<}{>}
{STOP}
(Delete)
{FLASH}
(Hyphen)
{MENU}