Storing and recalling broadcast, Frequencies, Using the function menu – Pioneer 2010 NAVIGATION UPGRADE SD-CARD CNSD-130FM User Manual
Page 83: Storing the strongest broadcast, Tuning in strong signals, Tuning in strong sig, Storing and recalling, Storing and recalling broadcast frequencies, Storing the strongest broadcast frequencies, Using the radio (tuner)
Storing and recalling
broadcast frequencies
With a touch of any of the preset tuning keys
to
, you can easily store up to six broad-
cast frequencies for later recall (also with the
touch of a key).
1
When you find a frequency that you
want to store in memory, keep touching a
preset tuning key
to
until the preset
number (e.g., P.CH1) stops flashing.
The selected radio station has been stored in
memory.
p Up to 18 FM stations, six for each of the
three FM bands, as well as six AM stations,
can be stored in memory.
2
Touch the same preset tuning key
to
.
The radio station frequencies are recalled from
memory.
Using the function menu
1
Display the
“Function Menu” screen.
= For details of the operation, refer to Display-
“Function Menu” screen on page
2
Turn MULTI-CONTROL to select a func-
tion.
Turning
MULTI-CONTROL switches between
the functions in the following order:
BSM (best stations memory)
— Local (local
seek tuning)
Storing the strongest
broadcast frequencies
“BSM” (best stations memory) lets you auto-
matically store the six strongest broadcast fre-
quencies under the preset tuning keys
to
and, once stored there, you can tune in to
these frequencies with the touch of a key.
1
Display the
“Function Menu” screen.
= For details of the operation, refer to Display-
“Function Menu” screen on page
2
Turn MULTI-CONTROL to display
“BSM”.
3
Press the center of MULTI-CONTROL to
begin a search.
“Searching” begins to flash. While “Search-
ing
” is flashing, the six strongest broadcast
frequencies will be stored under the preset
tuning keys
to
in order of their signal
strength. When this is complete,
“Searching”
stops flashing.
p To cancel the storage process, press the
center of
MULTI-CONTROL again.
p Storing broadcast frequencies with BSM
may replace broadcast frequencies you
have already saved by using
to
.
Tuning in strong signals
Local seek tuning allows you to tune in only
those radio stations with sufficiently strong
signals for good reception.
1
Display the
“Function Menu” screen.
= For details of the operation, refer to Display-
“Function Menu” screen on page
2
Turn MULTI-CONTROL to display
“Local”.
3
Press the center of MULTI-CONTROL.
Each press of the center of
MULTI-CONTROL
switches the setting between on and off.
4
Press MULTI-CONTROL left or right to
set the sensitivity.
! FM: Level 1 — Level 2 — Level 3 —
Level 4
! AM: Level 1 — Level 2
p The highest level setting allows reception of
only the strongest stations, while lower set-
tings let you receive weaker stations.
En
83
Chapter
16
Using
the
radio
(TUNER
)
Using the radio (TUNER)