Pioneer XV-DV9 - Manual (Page 82)

Additional information 12
82
En
These include digital components such as an
MD player, digital satellite, or a game system.
Connect using a coaxial digital cable (not
supplied).
• If you find that the LINE 1 audio is
distorting when played through this
system, you can set the input attenuator to
reduce the input signal level. See
Optional
system settings on page 74 to do this.
Recording mode
The Recording mode allows you to make
surround-compatible analog recordings from
the
LINE 1 (OUT) jacks. Dolby multichannel
sources will be downmixed to stereo for
improved playback with systems that can
provide matrix-decoding (like Dolby Pro Logic).
1 Press SOUND MODE.
2 Use the Use the / (cursor left/right)
buttons to select ‘Rec Mode?’.
3 Press ENTER.
4 Use the / (cursor up/down) buttons
to select ‘R.Mode On’ or ‘R.Mode Off’.
• R.Mode On – A surround-compatible
downmix (left-total/right-total, or Lt/Rt) of
Dolby multichannel sources is output,
(suitable for Dolby Surround Pro Logic or
other matrix decoding).
• R.Mode Off – A simple stereo downmix
(left-only/right-only, or Lo/Ro) is output
(suitable for playback on a two-channel
stereo system or on headphones).
• When Recording mode is on, most
surround sound-related functions cannot
be used. The display will briefly blink
RecMode On if you try and use a
prohibited function while Recording mode
is on.
• When Recording mode is off, the audio
from the analog output may be interrupted,
depending on the operation.
• The Recording mode automatically
switches off if you change the input
function (
DVD/CD , TUNER , etc.) or switch
the power off.
XV-DV9.book 82 ページ ２００４年２月２０日 金曜日 午前１１時４２分