Panasonic KX-MC6040 - Manual (Page 16)

1. Introduction and Installation
16 For assistance, please visit http://www.panasonic.com/help
1.7 Recording paper
The standard input tray unit can hold:
–
Up to 250 sheets of 75 g/m
2
(20 lb) paper.
– Up to 230 sheets of 80 g/m
2
(21 lb) paper.
– Up to 200 sheets of 90 g/m
2
(24 lb) paper.
– Up to 180 sheets of 105 g/m
2
(28 lb) paper.
– Up to 25 transparencies.
*1
– Up to 25 labels.
*1
– Up to 10 envelopes.
*1
– Up to 10 card stocks.
*1
*1 Only when using the unit as a printer. See page 30
for details.
L Please refer to page 106 for information on recording
paper.
L The unit is set for printing letter-size plain paper
by default.
–
To use A4 or legal-size paper, change the
recording paper size setting (feature #380 on
page 58).
– To use thin or thick paper, change the
recording paper type setting (feature #383 on
page 58).
1 Pull the standard input tray (
1) until it clicks into
place, then pull it completely out, lifting the front part
of the tray.
2 Before loading a stack of paper, fan the paper to
prevent paper jams.
3 Load the paper, print-side up (
2).
Important:
L Push and lock the plate (
3) in the standard
input tray, if it has come up.
4 Pinch the right side of the recording paper guide
(
4), then slide it to match the paper size mark.
Pinch the front and back recording paper guides (
5)
at the same time, then slide them together to match
the paper size mark.
L Make sure that the recording paper guides (
6)
are at the paper size mark and the recording
1
3
2
4
5
5