Panasonic VL-GM001 - Manual (Page 14)

14
Introduction and Installation
Arrow mark
DC terminal AC adaptor
8
Connect the power cable to the DC terminal, the power cord to the AC adaptor,
then connect the power cord to the AC outlet (100 V – 240 V, 50 Hz / 60 Hz).
• Be sure to connect the power cable to the 2 holes on the left side of the DC
terminal.
• For details on how to attach the power cable, see page 16.
DC terminal AC adaptor Power cord
To AC outlet
Power cable
9
Attach the DC cord to the clamp on the rear of the DC terminal.
• This will help to avoid the DC cord to disconnect from the DC terminal.
DC terminal
DC cord
Clamp
7
Take out the AC adaptor and the DC terminal from the case.
• Push the arrow mark on the front case, then release from the rear case.
• Take out the cardboard and wood screws. The wood screws are necessary
when attaching the AC adaptor and the DC terminal to a wall (page 15).