Precision Power PC6800 - Manual (Page 12)

10
ENDPLATE DIAGRAM
Pro6800
- +
POWER / MUTE
Designed and Handcrafted in the U.S.A.
Q BASS
0 + 18 Q BASS
REMOTE
PC PRO 650 12/13/96
13 11 12
1. Q SELECT 4/2
Push this button in for a Q setting of 4 and out for a setting of 2.
2. Q BASS 1
Use this switch with the Q BASS 2 to program the Q BASS PLUS ™ circuit. (see page 2).
3. Q BASS 2
Use this switch with the Q BASS 1 to program the Q BASS PLUS ™ circuit. (see page 2).
4. COOLING VENTS (see page 16).
5. SPEAKER/REMOTE CONNECTOR
After connecting remote and speaker wires, plug in the PowerLock
connectors here (see pages 7-9).
6. -12dB
For use with high level inputs (4V up to 12V). Push this switch
in to attenuate the input by 12dB (see page 14).
7. INPUTS A
Plug in the Front RCA leads from your head unit here (see page 14 & 16).
8. INPUTS B
Plug in the Rear RCA leads from your head unit here (see page 14 & 16).
9. OUTPUTS
Left and Right RCA outputs provide band pass or mono low pass signal to another amplifier.
10. POWER / MUTE indicator
A green light indicates that the amplifier is on, a red light indicates that the amplifier's
muting circuits have been engaged by an
ACM-420.
11. Q BASS ™ Level
Turn this control clockwise to boost the Q BASS PLUS ™ circuit by up to 18dB.
12. Q BASS REMOTE™ plug in
Plug in the data cable from the optional Q BASS REMOTE ™ dash mount level control here.
(This will bypass the amplifier's on board Q BASS ™ control)
13. POWER / GROUND POWERLOCK
After you have securely connected your power and ground wires, plug in the
Power / Ground
POWERLOCK connector here.
CHANNEL 5 / 6
L - L + R E M R + R -
CHANNELS 3 / 4
L - L + R + R -
OUTPUTS
INPUTS B
L R
-12dB
CHANNELS 1 / 2
L - L + R + R -
L R L R
INPUTS
A
Q BASS
2 1
Q SELECT 4/2
1 2 3 5 4
7 8 9 4 10 6
BACK TO CONTENTS