Controls diagram 1, Controls diagram one, Back to contents – Precision Power PC6800 User Manual
Page 13
CONTROLS DIAGRAM
ONE
11
X10
X10
Highpass and Lowpass crossover adjustments
and GAIN controls for CHANNEL 3/4 allow for
either Highpass, Bandpass or Lowpass.
When LP/BP switch is 'OUT', Bandpass crossover
adjustment (Channels 5/6, 12dB/octave) is the same
as Channels 3/4 and Lowpass goes to RCA OUTPUTS.
OR
When LP/BP switch is pressed in Channel 5/6 will be Lowpass
(24dB/octave) and RCA OUTPUTS are Bandpassed.
COMBINE switch:
Switch pushed 'IN' connects the rear
channels to the Inputs A.
Switch 'OUT' allows front-to-rear fading.
COMBINE
LP / BP
X10
X10
X10
20Hz-2K
50Hz-500Hz
200Hz-20K
200Hz-20K
200Hz-20K
CHANNEL 1 / 2 GAIN
CHANNEL 3 / 4 GAIN
CHANNEL 5 / 6 GAIN
X10
200Hz-20K
X10
200Hz-20K
24dB
12dB
PSC
20Hz-2K
20Hz-2K
12dB
12dB
20Hz-2K
20Hz-2K
12dB
12dB
Highpass crossover adjustment (12dB/octave) and GAIN control for CHANNELS 1/2
PSC:
Push this switch "IN"
to use a PSC-221
on channels 3/4.
(COMBINE switch out)