Pioneer VSX-D412 - Manual (Page 26)

Controls and displays 04
26
En
1 STANDBY/ON
Switches the receiver between on and standby.
2 STANDBY indicator
Lights when the receiver is in standby mode.
3 STATION (+/–) buttons (pages 42–43)
Selects station presets when using the tuner.
4 TUNING (+/–) buttons (page 40)
Selects the frequency when using the tuner.
5 Remote sensor
Receives the signals from the remote control.
6 ENTER
7 MULTI JOG/INPUT SELECTOR dial
The MULTI JOG/INPUT SELECTOR dial
performs a number of tasks. Use it to select
options after pressing
TONE, QUICK SETUP or
TUNER EDIT.
8 PHONES jack
Use to connect headphones.
When the headphones are connected, there
is no sound output from the speakers.
9 TUNER EDIT (pages 42–43)
Press to memorize and name a station for recall
using the
STATION (+/–) buttons.
10 CLASS (pages 42–43)
Switches between the three banks (classes) of
station presets.
11 BAND (page 40–41)
Switches between AM and FM radio bands.
12 MPX (page 41)
Press the MPX button to receive a radio
broadcast in mono.
13 INPUT ATT
Use to attenuate (lower) the level of an analog
input signal to prevent distortion.
14 FL DIMMER
Use this button to make the fluorescent display
(FL) dimmer or brighter.
15 LISTENING MODE buttons
STANDARD (pages 30, 32, 39)
Press for Standard decoding and to switch
between the various Pro Logic II options.
DOWN
STATION
TUNER EDIT INPUT ATT FL DIMMER CLASS BAND MPX
STANDARD
ADVANCED
SURROUND STEREO/
DIRECT
SIGNAL
SELECT
UP
ENTER
INPUT
SELECTOR
MASTER VOLUME
MULTI JOG
R
STANDBY
STANDBY / ON
PHONES
TUNING MONITOR
MULTI JOG
MULTI JOG
MIDNIGHT LOUDNESS TONE QUICK SETUP
LISTENING MODE
3 1 2 4
17 18 19 20 10 8 9 11 12 13 14 15 16 21
6 7 5
22
Front Panel