Pioneer VSX-D412 - Manual (Page 41)

Using the tuner 07
41
En
Tuning directly to a station
(VSX-D512 only)
Sometimes, you'll already know the frequency of
the station you want to listen to. In this case,
you can simply enter the frequency directly
using the number buttons on the remote
control.
1 Press the TUNER button on the remote
control to select the tuner.
2 Use the BAND button to change the
band (FM or AM), if necessary.
Each press switches the band between FM and
AM.
3 Press D.ACCESS (Direct Access).
4 Use the number buttons to enter the
frequency of the radio station.
For example, to tune to
106.00 (FM), press 1, 0,
6, 0, 0.
If you make a mistake halfway through, press
D.ACCESS twice to cancel the frequency and
start over.
Improving FM stereo sound
If the TUNED or STEREO indicators don't light
when tuning to an fm station because the signal
is weak, press the
MPX button to switch the
receiver into mono reception mode. This should
improve the sound quality and allow you to
enjoy the broadcast.