Panasonic KX-MB3020 - Manual (Page 56)

9. Programmable Features
56
Changing the password for
feature programming via
remote operation
{#}{
1}{5}{5}
1. {Menu} i {#}{1}{5}{5} i {Set}
2. Enter the current password. i {Set}
L The default password is “ 1234”.
3. Enter a new 4-digit password using 0–9. i {Set}
4. Enter the new password again. i {Set} i {Menu}
Note:
L It is recommended that you change this password from the default
password.
L This password is also used for feature programming via a web browser.
Setting the toner
maintenance time
{#}{
1}{5}{8}
The unit will automatically activate for maintenance, once every 24 hours.
Because this is to prevent the toner from solidifying, the noise that the unit
makes during maintenance cannot be stopped. However, if the unit’s noise
bothers you, you can change the start time.
1. {Menu} i {#}{1}{5}{8} i {Set}
2. Enter the maintenance start time.
L The default time is “ 12:00AM”.
L Press {*} repeatedly to select “ AM” or “PM”.
3. {Set} i {Menu}
Resetting all features (and
deleting all data in memory)
{#}{
1}{5}{9}
Before you dispose of, transfer or return the product, activate this feature to
reset all programmable features and to delete all data stored in memory.
KX-MB3020 only: Phonebook (or caller information) and fax transmission data
(journal report and faxes received in memory) will be deleted.
{
0} “ NO” (default)
{ 1} “ YES”
L Disconnect the telephone line cord (KX-MB3020 only), USB cable and LAN
cable before activating this feature.
To reset all features:
1. {Menu} i {#}{1}{5}{9}
2. Press {1} to select “ YES”. i {Set}
3. Press {1} to select “ YES”. i {Set}
Note:
L The counter view (feature #484 on page 58) will not be reset.
Setting the ringer pattern
{#}{
1}{6}{1}
(KX-MB3020 only)
{ 1} “ A” (default)
{ 2} “ B”
{ 3} “ C”
Changing the ring count in
FAX ONLY mode
{#}{
2}{1}{0}
(KX-MB3020 only)
{ 1} “ 1”
{ 2} “ 2”
{ 3} “ 3” (default)
{ 4} “ 4”
{ 5} “ 5 EXT. TAM” (External Telephone Answering Machine)
Setting the Caller ID list to
print automatically
{#}{
2}{1}{6}
(KX-MB3020 only)
{ 0} “ OFF” (default): The unit will not print the Caller ID list, but will keep records
of the information for the last 30 callers.
{
1} “ ON”: The unit will print the Caller ID list automatically after every 30 new
calls (page 51).
Setting the time adjustment
{#}{
2}{2}{6}
(KX-MB3020 only)
Using this feature, the unit’s date and time setting will be automatically adjusted
when caller information is received.
{
1} “ AUTO” (default): The date and time setting will be automatically adjusted.
{ 2} “ MANUAL”: Deactivates this feature.
Feature/Code Selection