Panasonic KX-MB3020 - Manual (Page 65)

9. Programmable Features
65
Setting the font number in
PCL
{#}{
7}{6}{9}
(KX-MB3020 only)
To set the font number to be used in PCL printing. The unit assigns a number
to each font.
1. {Menu} i {#}{7}{6}{9} i {Set}
2. Enter the font number from “ 000” to “054”, using the dial keypad.
L The default setting is “ 000”.
3. {Set} i {Menu}
Note:
L If the font source in PCL (feature #768 on page 64) is set to “ DOWNLOAD
FONT”, the default setting is “001”.
L To print the font list, see page 98.
Setting the font pitch/point in
PCL
{#}{
7}{7}{0}
(KX-MB3020 only)
To set the font pitch/point to be used in PCL printing.
1. {Menu} i {#}{7}{7}{0} i {Set}
2. Enter the font pitch from “ 00.44” to “99.99”, or the point from “004.00”
to “ 999.75”, using the dial keypad.
L The default pitch is “ 10.00” and the default point is “012.00”.
3. {Set} i {Menu}
Setting the symbol set in PCL
{#}{
7}{7}{1}
(KX-MB3020 only)
To set the symbol set to be used in PCL printing.
1. {Menu} i {#}{7}{7}{1}
2. Press {V} or {^} repeatedly to display the desired symbol set. i {Set}
i {Menu}
Setting the line breaks in PCL
{#}{
7}{7}{2}
(KX-MB3020 only)
To set each behavior when receiving CR, LF, and FF codes.
{
1} “ CR/LF/FF” (default): CR=CR, LF=LF, FF=FF
{ 2} “ CR+LF/LF/FF”: CR=CR+LF, LF=LF, FF=FF
{ 3} “ CR/CR+LF/CR+FF”: CR=CR, LF=CR+LF, FF=CR+FF
Setting the waiting time for
auto continue mode
{#}{
7}{7}{3}
(KX-MB3020 only)
To set the length of time before the unit recovers if a memory overflow occurs.
{
1} “ OFF” (default): Deactivates this feature.
{ 2} “ 20s”: 20 seconds
{ 3} “ 30s”: 30 seconds
{ 4} “ 60s”: 60 seconds
{ 5} “ 90s”: 90 seconds
{ 6} “ 120s”: 120 seconds
Changing the data timeout
setting
{#}{
7}{7}{4}
The unit will automatically print the remaining data in memory when the
computer does not send data to the unit during the set time.
1. {Menu} i {#}{7}{7}{4} i {Set}
2. Enter the desired data timeout setting from “ 005” seconds to “600”
seconds, using the dial keypad.
L The default setting is “ 060” seconds.
3. {Set} i {Menu}
Setting mutual A4/letter print
{#}{
7}{7}{6}
This feature allows printing in A4-size even if letter-size recording paper is
loaded, and vice versa.
{
0} “ OFF”: Deactivates this feature.
{ 1} “ ON” (default): Printing is possible between A4/letter-size.
Feature/Code Selection