Panasonic D-Snap SV-AS10 - Manual (Page 14)

14
Insert the Card
Be sure to turn the power off when you insert the card.
1
Slide the door while releasing the
lock.
1
Open the door. 2
2
Insert the card all the way in until it
clicks.
• Check the direction of the card.
• Do not touch the connecting terminal
on the rear of the card.
• If you do not insert the card all the way,
it may be broken.
3
Close the door. 1
Lock the door while sliding it. 2
• If you cannot close the Card/Battery
door completely, remove the card
once, then insert it again.
• We recommend using the cards made
by Panasonic. (Use genuine card only)
SV-AS10_EB.book 14 ページ ２００３年９月４日 木曜日 午後４時３分