Panasonic D-Snap SV-AS10 - Manual (Page 58)

58
Connecting to PC
(Continued)
_ Connecting this unit to PC
1
Connect the USB cable and the AC
adapter to the USB cradle.
• Be sure to insert the AC adaptor in a
outlet.
2
Insert the card in this unit. (P14)
3
Turn this unit on, and set to the
playback mode.
4
Attach this unit to the USB cradle.
• This unit turns to the USB connection
mode. In this mode, you cannot turn
the power off. If you turn the power off,
disconnect the USB cable first.
• When the Power/Card Access Lamp of
this unit is blinking, do not remove this
unit from the USB cradle nor
disconnect the USB cable. The
software may not function correctly
and the transmitting data may be
damaged.
• Use the supplied USB cable only.
• Do not disconnect the AC adaptor from
the PC during connection.
• When the USB connection mode
(displayed as PC ACCESSING) is not
canceled even if you turn the PC off,
disconnect the USB cable.
• If the PC is in the Standby mode while
connecting to the camera, the PC may
not recognize the camera when
recovering from the Standby mode. In
this case, restart the PC.
When using Windows 98SE/Me,
connect only after installing the driver.
(P55)
Be sure to insert the battery and
connect the AC adaptor.
SV-AS10_EB.book 58 ページ ２００３年９月４日 木曜日 午後４時３分