Call settings, Connection settings – Panasonic X701 User Manual
Page 110
108
CALL SETTINGS
From Settings menu:
1. Open General.
2. Scroll to Call and open.
3. Scroll to:
CONNECTION SETTINGS
Access Point Settings
Access points are sets of configurations that connect your phone to the Internet and
other services. Your phone uses three main sets of access points: Multimedia (MMS),
Browser, and Internet. Access points must be set up in order to send and receive MMS
Screen saver
timeout
Scroll
or
to choose from 1 minute to 30 minutes of no activity until
screen saver switches on and press OK.
Send my
caller ID
Choose Set by network, Yes or No. Determines whether your mobile
number is presented to the person you are calling. Network dependent.
Call waiting
Press Options and select Check status. If needed, select Activate. Net-
work will send confirmation message. When activated, if you are on a call
and there is an incoming call, you can put the first call on hold and answer
the second call. See Call Waiting on page 19.
Automatic
redial
Select On to redial if the call is not connecting. Press
to stop auto-
matic redialling.
Summary
after call
Select On to display a brief summary of duration of last call.
Speed
dialling
Select On to start dialling by a press and hold of preset number key in
standby mode. First, set up Speed dial keys (see Speed Dial on page 39).
Anykey
answer
Select On to answer incoming calls by pressing any key except
,
,
or .
Open to
answer/end
Select On to answer a call by opening the flip, and to disconnect phone
calls by closing the flip. When set to Off and you close the flip during a
call, the caller's voice switches to the back loudspeaker.
Line in use
This setting appears if you have subscribed to Alternate Line Service, in
which you can have two different phone lines with the same SIM card.
Select Line 1 or Line 2.
Line change
This setting appears if you have subscribed to Alternate Line Service (see
Line in use setting). You can disable selection of one of the phone lines.
The PIN2 code is required to return use of a previously blocked line.