Panasonic X701 - Manual (Page 114)

112
The PIN and PIN2 codes affect only the current SIM card as they are stored in the SIM
card, not the phone memory.
From Settings menu:
1. Open General.
2. Scroll to Security and open. Open Phone & SIM.
3. Scroll to desired setting and select:
• Enter Lock Code to Use Phone
To prevent unapproved use, you can lock the phone. When the phone is locked, the
lock code must be entered before the phone can be used. The phone lock icon
indicates that the phone is locked.
To unlock the phone, enter the lock code. You may be able to dial the local emergency
number and accept incoming calls when the phone is locked.
From Settings menu:
1. Open General.
2. Scroll to Security and open. Open Phone & SIM.
3. Scroll to desired method and select:
Activate Phone
PIN Select Yes to require entry of PIN code each time the phone is
switched on. Requires PIN code to activate.
PIN code To change PIN code, enter current PIN code, then new PIN code twice.
Press OK.
PIN2 code To change PIN2 code, enter current PIN2 code, then new PIN2 code
twice. Press OK.
Note: If PIN or PIN2 code is entered incorrectly 3 times, the SIM card locks. Contact Vodafone
for PUK or PUK2 code (PIN unblock key code). If the PUK or PUK2 code is entered
incorrectly 10 times, the phone will not operate. All information stored in the SIM card is
lost and the SIM card must be replaced.
Shortcut: To lock the phone, press and select Lock phone.
Autolock
period Set the phone to lock after a time period of no activity. Select User
defined to type in time period in minutes. Requires lock code to set.
Lock code To change lock code, enter current lock code, then new lock code
twice. Record the new code in a safe place. The preset lock code is
12345.
Lock if SIM
changed To prevent the phone from being used if an unknown SIM card is
inserted, select Yes.