PYLE Audio PLD71MU - Manual (Page 20)

Radio Operation
-19-
Touch “ ” to next .
Touch “ ” to previous .
When an FM stereo broadcast is
hard to receive
Touch the section on
touch screen (or press button on
the remote control ) to select the MONO
or STEREO mode .
(When Stereo mode is activated, the ST
symbol will appear . )
“STEREO/MONO”
ST/MO
Listening to the Radio
Switching To Radio Mode
Touch the screen of
range (or press the MOD button
on the front panel ) repeatedly to “MODE”
MODE
select the RADIO mode. the following
information will appears as below:
S-WOOFER
FM1 87.60
MHZ
APS
STEREO/MONO
FLAT
NO-DISC
12:06
DX ST
DSP
AF
PTY BND
AF TA LUD CLK LOC/DX
MODE
SEL VOLUME+ VOLUME-
MUTE ON
FM1 87.60
MHZ
1 2 3 4 5 6
FLAT
NO-DISC
12:06
DX ST
Touch the range on the touch
screen (or press LO/DX button on the
remote control ) to select the LOCAL
or DX mode .
( You can choose between the LOCAL
and DX(DISTANCE) mode for local or
long-distance traffic news . )
“ LOC/DX ”
To tune in strong-singnal FM
Station only (LO/DX function)
FM1 FM2 FM3
AM2(MW2) AM1(MW1)
Selecting The Frequency Band
Touch the screen of
section (or press the on
the front panel ) repeatedly to
“ BND ”
BND
select the band , the message will show
in turn :
BND
Start Searching For a Station
During Radio mode, briefly touch the
screen of “
” section or press the
“ ” on front panel to increase frequency
by one step of channel spacing .
Briefly touch the “ ” section or press
the “ ” button on the front panel to
decrease frequency by one step of
channel spacing .
Manual Search
Automatic Search
During Radio mode, touch and hold
(for more than 2’s ) the screen of “
/ ”
section or press longer the “ / ” on
the front panel to start search for a radio
station automatically .